Millar Instruments manufactures and markets a family of ultra-miniature reusable pressure catheters for use in small laboratory animals. The catheter body is narrower than the tip sensor to allow flexibility and to minimally obstruct the vessels or valves through which it passes. The sensor is side-mounted at the tip, and all models have straight tips. These ultra-miniature catheters range in size from 0.8 to 3.5 French and are available in usable lengths from 12 to 140 cm.
Analyze your pressure data with our new software
Download Ultra-Miniature Brochure
Frequently Asked Questions

NOTE :
Millar Instruments, Inc. validates the use of its control units with Millar sensor-tipped catheters to provide a complete system for making accurate measurements. The use of non-Millar sensor-tipped catheters with Millar control units may result in: phase delay, signal distortion, non-linearity, and inconsistent calibration. If you have any questions about compatibilty of components, please contact Millar at 1-800-669-2343 , and we will be glad to assist you.

The following table lists the ultra-miniature models:

* Click to link to specific model photo and information
NOTE: Viking connectors are round with 4 pins. Low Profile connectors are flat with 4 pins

Accessories
Millar Instruments offers a selection of Pressure Control Units and cables that interface Millar Mikro-TipR catheter pressure transducers to physiological monitors. All accessories are sold separately.